مقبض غرفة الاستحمام

【 Gravity Guardian · Safety Innovation 】 304 stainless steel shower room handle | Military grade load-bearing 200kg+nano anti slip pattern, seamless embedded installation, wet and slippery bathroom instantly becomes a safe armrest cabin

1. Military grade load-bearing, as stable as a rock
1.8mm 304 stainless steel body: with a nickel content of 12% and a chromium content of 18%, it has passed a 48 hour salt spray test and has a chlorine water corrosion resistance life of over 15 years;
Dual bridge mechanical architecture:
Embedded reinforcement bars: The lateral tensile test reached 200kg (≈ 3 adults suspended simultaneously), far exceeding the national standard by 5 times;
Triangular distributed anchor point: 6 304 stainless steel expansion bolts disperse the force, eliminating the risk of glass cracking.

2. Nano level anti slip, zero error wet grip
3D wave anti slip pattern: laser engraved 0.3mm deep and shallow staggered patterns on the surface, increasing wet hand friction coefficient by 70%;
Thermostatic tactile design:
Hollow tube body isolates cold and hot conduction, avoiding freezing hands in winter and scalding palms in summer;
The handle diameter is 28mm (± 2mm suitable for male and female hand shapes), which complies with ErgoFit ergonomic certification.

3. Invisible installation technique
Embedded screw cover:
After drilling and installation, the cap should be flush with the handle, with no visible protrusions;
The cap is embedded with a waterproof silicone ring to isolate water vapor infiltration.

4. Versatile scene adaptation, one pole with multiple capabilities
Three mode deformation:
Horizontal armrest: horizontally installed on the inside of the shower room, supporting and preventing slipping;
Vertical handle: vertically fixed to the side wall of the bathtub, assisting in the use of force for entry and exit;
45 ° angled bracket: Suitable for the side of the toilet, helping elderly/pregnant women stand up;

Free cutting of length:
Standard 60cm handle, can be cut to 40-80cm as needed.

5-minute minimalist installation:
Positioning cleaning: wipe the installation surface with alcohol and attach AR positioning stickers (mobile phone scanning automatic projection punching points);
Fixed base: no need to use nail adhesive to press or drill holes to embed expansion bolts;
Lock grip handle: Insert the handle and rotate the hexagon socket screw to a torque of 3N · m, then press and seal the cap.
Full scene protection scheme:
Shower anti slip: Install a horizontal armrest on the opposite side of the showerhead, which can be grasped by wet hands to support showering/shaving;
Bathtub assist: Vertical handle assists in getting up, with a load-bearing capacity of 200kg without shaking;
Toilet care: The 45 ° angled bracket provides support for standing, making it more reassuring for pregnant women/elderly people to use.

Extreme Violence Test:
200kg load suspension for 72 hours, deformation rate<0.02mm;
100000 high-frequency grip simulations, with anti slip wear less than 3%;
304 stainless steel shower handle - Reshaping bathroom space with safety engineering, making every support a trusted fulcrum of life!